201903 – Mocki – New Generation Integrated Digital Engineering to Embrace Document Revision Identification
Author(s): Jacek Mocki
Date presented:
Technical Meeting Papers
Technical Meetings are held three times per year.
Papers are available here for download.
You must be logged in to be able to download content.
202503 – Afshar – CBTC Signalling System & Emerging Technologies; AI, Machine Learning & Crowd Computing for Adaptive Real-Time Train Timetables
By: Parisa Afshar
Date Presented: March 21st, 2025
Read More...
202503 – Li – Competency Management in the Australian Railway Signalling Industry
By: Daniel Li
Date Presented: March 21st, 2025
Read More...
202503 – Moore – Signal Design Report: What Is It and Why Do We Need It?
By: Trevor Moore
Date Presented: March 21st, 2025
Read More...
202503 – Sudholz – Break of Gauge: Competencies in the Australian Signalling Project Environment
By: Thomas Sudholz
Date Presented: March 21st, 2025
Read More...
202503 – Turner – Growing Graduates in the Sun: 30 Years of Signalling Graduate Development in Queensland Rail
By: Blake Turner
Date Presented: March 21st, 2025
Read More...
202503 – Villegas – The Importance of Operation and Maintenance Concepts in the Delivery and Operation of Rail Networks
By: Selena Villegas
Date Presented: March 21st, 2025
Read More...
2004 – July – Modernisation of KTMB’s Signalling & Telecommunication Systems
Date Presented: October 20th, 2024
The total route length of KTMB’s network amounts to approximately 1670 km and is mainly single track except for about 150 km of electrified double track sections around the capital city, Kuala Lumpur, for commuter services.
Read More...
1998 – July – Skilton – Tranz Rail’s National Train Control Centre
By: JT Skilton
Date Presented: October 20th, 2024
JT Skilton Signalling systems within Tranz Rail which require control from a remote location can be classified into three types, Centralised Traffic Control (CTC), remote controlled interlockings in Track Warrant (TW) territory and remote controlled interlockings embedded in Double Line Automatic (DLA) signalling. The CTC systems control the movement of trains in both directions over a single line section divided up into block sections and crossing loops. A field unit is installed at each crossing loop for the purpose of communicating with the control centre. TW control requires all trains to hold a warrant for the section of line being traversed. This warrant is issued to the locomotive engineer verbally over the train radio system and checked for correct reception by reading back over the radio system to the control centre. A selected number of crossing loops within TW territory are fully interlocked and equipped with a field unit which allows the Train Control Operator (TCO) to have full control over motor points and signals. Centralised control of interlockings in DLA territory is used where junctions between main and branch lines occur. Central control is used for movements to and from the branch line and, although it can also be used for signalling along the main lines, the interlocking can be switched to automatic for main line movements.
Read More...
1998 – July – McDonald – Today’s Interlocking – A World of Applications
By: Wayne McDonald
Date Presented: October 20th, 2024
Wayne McDonald Computer based interlockings today must be adaptable to the vastly different environments found in the many rail networks throughout the world. This paper overviews some of these environments where one such system, WESTRACE, has been installed and it highlights some of the special requirements essential to suit those locations.
Read More...
1997 – November – Brock, Ebzery & McMurtrie – Homebush Bay Rail Link – Signalling Design and Management
By: Peter Brock, Frank Ebzery & Bruce McMurtrie
Date Presented: October 20th, 2024
Peter Brock, Frank Ebzery & Bruce McMurtrie The construction of the Year 2000 Olympic facilities and the relocation of the Royal Agricultural Show Grounds Homebush Bay requires the construction of a high capacity transport link. Heavy rail is the only transport system that will supply the required capacity. The new Homebush Bay rail Loop will connect Olympic Park and the new Homebush Bay Showgrounds with the rest of the Sydney metropolitan rail networkTrail loop is nearing completion and will be commissioned on the 22/23 November 1997.
Read More...
201903 – Dey – Systems Engineering Assurance – A Holistic Approach
Author(s): Subhajit Dey
Date presented:
201903 – Alvarez – ETCS L2 and CBTC Over LTE – Latest Developments
Author(s): Rodrigo Alvarez
Date presented:
201811 – Zhu et al – A Comprehensive Approach to Control and Minimize Squat Defects in a Railway Network
Author(s): H Zhu, H Li, A Al-Juboori, D Wexler, C Lu, A McCusker, J McLeod, S Pannila & J Barnes
Date presented:
201811 – Szacsvay & Pillai – We’re Not in Kansas Anymore, Toto – Rolling Stock Signalling Compatibility Assessment
Author(s): Paul Szacsvay & Kershan Pillai
Date presented:
201811 – Page & Stamm – Automating ETCS for Enhanced Capacity and Performance
Author(s): Charles Page & Bernhard Stamm
Date presented:
201811 – Palazzi – Advanced Signalling on Our National Freight Network: Avoiding a Digital Break of Gauge
Author(s): Bill Palazzi
Date presented:
201811 – Shead – Safety and Reliability in Signalling Systems
Author(s): Joseph Shead
Date presented: